The CyberCycle does not require high bandwidth requirements; a standard high-speed internet connection can support several bikes.
The recommended internet speeds are at least 3 mbps download speed, and 1 mbps upload speed per bike.
HOW TO CONNECT YOUR BIKE
1) Select BIKE SETTINGS from the menu icon in the top right corner and enter the code 7913 to enter the settings menu.
2) The internet settings card will be the first thing you see when you enter the bike settings menu. This will show the status of your Ethernet and Wifi connection. To connect via Ethernet, simply plug your active ethernet cable (cat5e or cat6) into the control panel located next to the power cord. To connect via Wifi, click the connect button.
3) Select the Wireless network that you would like to connect to (the CyberCycle can connect to discoverable b/g/n networks with WPA2 security) and enter your network password. You should now be connected.
If problems persist head to our form submission page to contact our technical staff
For advanced configurations please scroll to the right side of the bike settings menu and tap the "Configure Bike" button. Here you will find additional information including your IP and MAC addresses for both your wired and your wireless configurations so that you can adjust your network settings as needed.
PORTS AND DESTINATION SERVERS
The CyberCycle uses the following ports and destination servers:
If your problem persists, submit an issue report!